Description:
Ultrasonic extraction uses ultrasonic extraction machine to increase the molecular motion frequency of substances by using the strong cavitation effect, mechanical vibration, disturbance effect, high acceleration, emulsification, diffusion, crushing and stirring effects generated by ultrasonic radiation pressure. And speed, increasing the solvent penetration, thereby accelerating the target component into the solvent and facilitating the extraction of the mature extraction technique. Ultrasonic extraction technology is applicable to a wide range of extracting agents. Water, methanol, ethanol and the like are commonly used extracting agents, which have the advantages of simple operation and high extraction efficiency.
Application Field:
1)Ultrasonic treatment of chemical extraction, biodiesel production, organic synthesis, treatment of microorganisms, degradation of toxic organic pollutants, chemical reaction rate and yield, catalytic efficiency of catalysts, biodegradation treatment, ultrasonic anti-scaling, biological cell comminution, dispersion and coagulation A local small environment that is very beneficial to the reaction process can greatly increase the reaction rate and reduce the reaction conditions.
2)Comparison of effects in various application areas
Application field |
Effect and Impact |
Chinese medicine extraction |
Adding ultrasound equipment can increase the leaching rate by 30-50% |
Ballast water treatment |
Cooperate with ultraviolet light to assist in killing algae |
Food sterilization |
Adding an ultrasound system to the original process can reduce colony count by 30% |
Emulsification |
Instead of high shear emulsification, emulsified particle size 1um |
High pressure high temperature container cleaning |
Thoroughly solve the problem of filter, silt, blockage, etc. |
Fine particle dispersion |
Fine particles agglomerated in the dispersion |
Biodiesel production |
Adding this ultrasound system to the original device can increase the original output by about 30%. |
Oil industry application |
Crude oil dehydration, crude oil demulsification |
Biochemistry |
Cell disruption |
Parameters:
Model |
SPS20-500S |
SPS20-1000 |
SPS20-2000 |
SPS20-3000 |
SPS20-3000Z |
Frequency |
20Khz |
20Khz |
20Khz |
20Khz |
20Khz |
Power |
500 W |
1000 W |
2000W |
3000W |
3000 W |
Voltage |
220V |
220V |
220V |
220V |
220V |
Pressure |
Normal |
Normal |
35 MPa |
35 MPa |
35 MPa |
Intensity of sound |
>10 W/cm² |
>10 W/cm² |
>40 W/cm² |
>60 W/cm² |
>60 W/cm² |
Processing capacity (L/H) |
0.5-2.0 |
1.0-5.0 |
20.0 |
50.0 |
100.0 |
Material of probe |
Titanium Alloy |
Titanium Alloy |
Titanium Alloy |
Titanium Alloy |
Titanium Alloy
|
Generator |
Digital type |
Digital type |
Digital type |
Digital type |
Digital type |
Display:
Performance advantages:
1.Adopt intelligent control technology to achieve stable amplitude output of ultrasonic amplitude, ensuring uniform and stable cavitation effect.
2.Adopt automatic frequency matching mode to ensure that the ultrasonic transducer works at the best time every time.
3.The system has two working modes, continuous and intermittent.
4.The system can set the ultrasonic working time independently and facilitate the experimental analysis.
5.The system uses a focused design,that have high energy density, which significantly improves the efficiency of the experiment.
6.The system has a variety of protection mechanisms to ensure stable operation and long life.
7.The system uses a 5V fan,that have high safety factor.
Ultrasonic Sonicator Reviews:
Customers' evalution as follow:
The ultrasonic sonicator works very well.
We improved yield by 5% if we run for 5 minutes.
You have been most kind and helpful. Thank you for your expert communication.
Customers' recognition and trust is our driving force.
Shengpai Technology relies on "Customer Service Being First" as its corporate culture. Aim is "Quality First, Service First". Today, because of its abundant professional knowledge and good after-sales service, Shengpai Technology has gained a very good reputation.
FAQ:
1. Do you have it in stock?
We only have common products in stock but not for the nonstandard products.Because all the products need make based on customers' different requirements.
2. Could you advise to us the design based on our special requirements or based on our object samples?
Of course, we can do. Please tell us your idea or your application.
If you have sample object, send it to us or send detail pictures.
3.How long do you make the order product?
Common products for 7days, big qty and none standard products for 20days.
4. Do you have operating manual?
Of course, we will put it with the goods together.
5. How about the quality?
We have export to many other customers from all over the world, the feed back is good,quality is the first of our company.
6. Could you do OEM?
Yes, of course. We can produce according customers' requirement, just send us your requirements and design of drawing and sample.
7. Could we as your agent?
Of course. We are looking for sole agent in Country who have the willing to cooperate with us for long business term.
8. Payment:100%T/T in advance for small order. 70%T/T in advance as deposit, 30%T/T paid before shipment
9. Delivery?
1-2 units we could send by EXPRESS(DHL, UPS, FEDEX, TNT, EMS), heavy weight more than 50kg,we suggest to use sea freight LCL or by air.
10. Warranty:
One year warranty with none human damage. After warranty time, factory will repair fix it or send the new parts on cost price. We can produce according customers'requirements, OEM is available, pls send me inquiry for quotations.